Reciprocating Saw Blades

6 Best Model Of Makita Circular Saw

2011-01-10T00:32:00.001-08:00

There are many types of makita circular saw out there. I will discribe the few of them which is available in the market today.

1, Maktec 185mm(7¼'') Circular Saw - This product of makita has a flat rear side motor housing for easy replacement of saw blade with comfortable handle design for comfort and control.

It has 45 degree front bevel lock, continuous rating input of 1050 W. The blade diameter is 185 mm (7 1/4") with max cutting capactities at 90: 66 mm at 45: 44 mm.

Overall length: 286 mm, guide rule, Hex wrench.

2, Makita 160mm Circular Saw

Makita Circular Saw Features:
• Ultra fast cutting through all grades of timber even handles hardwoods with ease
• Thin kerf blade gives a smooth cutting action
• Robust and light with a compact design makes it the ideal saw to take onsite
• Tight gear tolerance for minimal arbor float and quieter operation
• 45° front bevel lock

3, Makita 235mm Circular Saw

Features:
• A hardworking saw with the power to rip through most materials
• Sturdy steel safety cover with industrial durability
• High rigidity of rugged steel base provides stability
• Flat-end motor housing for easy blade changes

4, Makita 210mm Circular Saw

Features:
• Maximum cutting depth 75.5mm.
• Maximum bevel capacity 50°.
• Lightweight at 4.8kg.
• Blower function for a cleaner cutting view.
• Bevel adjustment with positive stops at 22.5° , 45° and 56°.

5, Makita 165mm Circular Saw

Features:
• Powerful 1,300W motor.
• Bevel range of -1 to 48 degrees.
• Electronic control - soft start, overload protector, constant speed and variable speed by dial for optimum cutting speed.
• Mechanical brake.
• Sawdust ejection backwards for comfortable operation - connectable to vacuum.
• Non-slip rubberised grip.

6, Makita 260mm(10-1/4") Circular Saw

Features:
• 14 AMP motor delivers enough power to cut beams and timber
• Large cutting and bevel capacity (3-3/4'' at 90° and 2-3/4'' at 45°)
• Electric brake for maximum productivity
• Precision gearing with ball and needle bearing construction for smooth and efficient power transmission
• Well balanced and weighs only 8kg for better control
• Blade wrench is attached to the saw for fast and convenient blade changing
• Front, top and rear handles are positioned to fit hands comfortably for better control

.... and many many more makita circular saw units available from Makita power tools.

5 Best Cordless Reciprocating Saws

2011-01-10T00:30:00.000-08:00

Several brand of cordless reciprocating saws are available in the market today. Check the few of them.

1, DeWALT DC385BT 18V Cordless Reciprocating Saw (BARE TOOL)

- 1" stroke length and 2,900 spm for fast cutting, Keyless blade clamp allows quick blade change without touching blade or reciprocating shaft, Powered by the DEWALT 18V "system" of battery packs, Compact and lightweight, 7.1 lbs, Electric brake prevents blades from breaking when exiting plunge cuts, Blade can be reversed for flush and plunge cutting, Pivoting shoe with open top for maximum visibility, Variable speed with trigger lock for increased blade control.

2, Makita 4390DW 9.6-Volt Ni-Cad Cordless Reciprocating Saw

- Ideal for cutting wood mild steel and more, Makita's 9.6-Volt Cordless Recipro Saw features a 9/16-inch stroke length and 2,700 SPM for fast and smooth cutting. A front grip design enhances control and comfort. Lightweight and compact, this 3.1 lbs. tool is easy to handle and works well in tight quarters.

A convenient lock-off switch prevents accidental starts for added safety and less marring of the workpiece. A specially designed blade offers maximum efficiency. Your purchase includes a battery, charger, and hex wrench.

3, Milwaukee 2420-22 12-Volt Hackzall Saw Kit

- Milwaukee has outdone itself again. The M12 Hackzall has a 1/2" stroke length for greater control in tight spaces, 0-3,000 SPM for fast cutting, sealed all-metal mechanism for increased durability and a unique built-in LED for illuminating cutting area. Compact, powerful and durable, it is the secret weapon behind precision cutting.

The M12 Hackzall features enable consistent one-handed operation, ideal performance through the toughest materials and extreme durability able to withstand jobsite use and abuse.

The Milwaukee M12 Hackzall is perfect for wood, metal, drywall, PVC rough out and finish, closet bolts, threaded rod sizing and trimming, insulation, EMT and Fiberglass.

4, Bosch 1646K-18 18 Volt Reciprocating Saw Kit with 2 Batteries

- This 18-volt reciprocating saw from Bosch offers plenty of power in a convenient cordless package. Since their introduction, cordless reciprocating saws have come a long way in replicating the cutting speed and power of their corded cousins, and this 18-volt model from Bosch is no exception.

Unlike competing models, this one lets the user choose between a short 3/4-inch stroke length, favored by many for plumbing and electrical applications, or a long 1-1/4-inch stroke for faster demolition cuts. While using a reciprocating saw will probably never be an easy job, the rubber boot and soft rear grip on this model help take out some of the rattle. A smooth-running, Bosch-built power train and wobble plate also add to this saw's clean performance.

There's trigger-controlled variable speed from 0 to 2,300 spm and a simple push-button foot adjustment. As a finishing touch, you get a solid tool-free blade-changing system that's easy to use quickly and allows for blade inversion.INCLUDES: (2) 2.4 amp battery packs, 1- hour charger, and Carry bag.

5, Black & Decker CRS144K 14.4 Volt Cordless Reciprocating Saw

- The CRS144 Cordless Reciprocating Saw is powered by the FireStorm 14.4-volt battery system. It has a quick change tool-free blade change system, and runs at 0-3,000 spm for greater versatility. Extra control is provided through the electric brake. The battery is spring-loaded for easy insertion and removal. Your purchase includes the reciprocating saw, battery, charger, blade, and kit box.

...and many other brand available in the market. To buy your cordless reciprocating saws visit your favorite store or at Amazon.

How To Find The Best Bow Saw Blades

2011-01-10T00:26:00.000-08:00

There are many manufacturer and suppliers of bow saw blades all over the world. You can check/buy it online or you will go to your nearest home depot store in your area.

Here is the few of them:

1, Gilmour 24 Inch Bow Saw Replacement Blade - Hardened and tempered raker tooth blade for fast cuts and long life, Weight: 0.15 lbs..

2, Mintcraft 30In Bowsaw Replacement Blade 16830H-R - 21" replaces blade for SKU 699.7944 bowsaw, 30" replaces blade for SKU 699.7951 bowsaw.

3, Bahco Bow Saw Replacement Blade, 30 Tpi 23" - this is a very good product.

4, Westward 2RDL6 Bow Saw, 30 In Steel Blade - Bow Saw, Blade Size 30 In, Blade Material Steel, Frame Type Bow, Frame Material Steel, Handle Type Curved, Handle Material Steel, Overall Length 32 3/4 In, Features Double Edge Blade Teeth For Fast And Easy Cutting

5, CORONA BS 4010 BOW SAW 21" BLADE - Price Range: $8.00 - $16.00

- This particular saw is crafted of a high grade steel alloy blade having hard point teeth for sawing ease and longer blade life.

6, Ace Hardware ACE BOW SAW 24" - 24" High carbon SK5 heat treated blade Sharpened tip for precision cutting.

7, Corona Clipper BS 4010 Bow Saw, 20-Inch Blade - The Corona Clipper 21-Inch bow saw is ideal for cutting branches, logs and trees. The replaceable blade is made of high-grade steel alloy with hard-point teeth for longer service life. For added safety there is a safety tension lever which also allows for quick blade replacement.

8, 30" Bow Saw Blade (183-80825) Category: Handsaw Blades - Length = 30 in Cutting Edge Cutting Packing Type = Saw Blade

9, Grizzly H6129 3 Pack Blades For 18" Bow Saw

...and many many more bow saw blades available in the market.

Saw Blade Sharpener

2010-12-18T01:12:00.000-08:00

There are several brand of saw blade sharpener in the market. One of them is the 110W Saw Blade Sharpener with Accessories.

Now you can finally have sharp blades when working on your DIY or woodwork. There's nothing worse than trying to cut a clean edge off a plank of wood when the blades not sharp.

With this fantastic Saw blade sharpener, you can sharpen your saw blades at home or for your carpenter contracting jobs. With a powerful 110W motor and a speed of 5300RPM, this is certainly the Saw blade sharpener for you! But you'd better be quick because this may out of stock in the future.

Another good quality saw blade sharpener is the US-550 Sharpening System (carbide saw blade, dado, router bit, shaper cutter, hole saw sharpener with diamond wheel) from Tronax Machinery.

Tronax Machinery has created a universal sharpener for sharpening saw blades, router bits, shaper cutters and hole saws. Quick-change attachments along with the price and versatility of this machine make it the most valuable sharpening system on today's market. Plus, all adjustments and set up are done by hand-a luxury not found with other sharpeners.

The US-550 universal sharpener was designed for all woodworkers. With this sharpening system you no longer need to buy a duplicate set of tools for the time (usually 1 or 2 weeks) when your tools had to be sent to a sharpening company. Any company or homeowner who has tools to be sharpened can benefit from this sharpening system.

If the tool is dull, it can be sharpened with the US-550 universal sharpener quickly and easily. Operating the US-550 is simple and requires no previous experience. Easy to understand training video.

The attachments can be changed in just 5 seconds! Save time, save money! This machine sharpens carbide saw blades from 3" to 18" in diameter, various sizes and shapes of carbide router bits, carbide shaper cutters of many shapes up to 6" in diameter, and hole saws from 1" to 6" in diameter.

With this US55001 US-550 Sharpening System you will have everything you need to grind these tools.

Miter Saw Blades

2010-12-18T01:11:00.001-08:00

There are many types of miter saw blades in the market.

Here is the few of them:

1, Kempston 99362 10-Inch by 60 Tooth Industrial Thick Kerf Sliding Compound Miter Blade with 5/8-Inch Arbor and Teflon Coating

2, Freud LU91R010 10" Diameter x 60T ATB Thin Kerf Sliding Compound Miter Carbide-Tipped Saw Blade with 5/8" Arbor (.090 Kerf)

- This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws.5 degree negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence.kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.

Application: Fine Finish Blades for Sliding Miter & Radial Arm Saws.

3, Miter saw blades manufactured by Amana Tool. These saw blades are of the highest industrial quality with extra large micrograin carbide teeth (can be sharpened many times), large gullets for improved chip clearance, thick heavy duty steel plates with copper plugs to reduce noise and vibration.

Here is the miter saw blade from Amana Tools:

1, Miter Saw Blades - 2° Negative Hook - 4 ATB & 1 Raker - For miter joint cutting in softwood and hardwood, moldings and picture frames.

These saw blades can be used on double miter machines.

2, Miter Saw Blades - 5° Negative Hook-California TC Grind - California Triple Chip design of tooth is the perfect choice for the picture frame industry. Burr-free cuts in aluminum and other non ferrous metals. Cuts clean wood and wood products. Works in miter saw, compound miter saw and sliding compound saw. –5° hook. These saw blades can be used in double miter machines.

3, Thin Kerf Miter Saw Blades - ATB Grind - Thin kerf blades are designed for miter smooth cuts; less drag on bearings and brake and reduces stock loss on expensive woods and veneer plywoods. Not recommended to cut stock over 3/4" without the use of a stabilizer.

4, Thin Kerf Sliding Compound Miter & Radial Saw Blades - A.G.E. Series - Specially designed for sliding compound miter saws, these thin kerf saw blades provides an exceptional finish. The 3°-5° negative hook angle provides an extra margin of safety by pushing the stock downward and toward the fence. Thin kerf blades reduce waste in expensive materials and require less horsepower to operate.

...and many more quality products from Amana Tools. Visit your favorite store online or offline.

Metal Cutting Saws

2010-12-18T01:10:00.002-08:00

There are several brand or manufacturer of metal cutting saw in the market today. One of the highest of it quality is the Makita LC1230 12-Inch Metal Cutting Saw.

This Metal Cutting Saw is fantastic for cutting light pipe, angle iron, tubing, conduit and channels. Its D-shape handle means easy gripping. Economical and long lasting carbide tipped blades cut through material fast. No more accidental starts thanks to this clever tool’s handy lock-off button. The guide plate on this saw adjusts 0 - 45 degrees for bevel cutting and sports a quick release vise for secure stock retention and fast repetitious cut-offs. The socket wrench is stored on the base for easy access, and a shaft lock system shaves a lot of time off wheel changes. Your purchase includes carbide tipped blade, a socket wrench, and a switch button.

FEATURES

- Cuts four times in light pipe, angle iron, tubing, conduit and channel than abrasive cut-off saws
- Powerful 15 amp motor
- D-shape handle for easy gripping
- Long lasting carbide tipped blade for cost efficient, clean and accurate cutting; virtually burr free
- Lock-off button prevents accidental starting
- "Tool-less" guide plate adjusts 0 - 45° for quick and easy miter cutting
- Quick release vise for secure stock retention and fast repeated cut-offs
- Socket wrench stores on base for convenient blade changes
- Shaft lock for easy blade changes with just one wrench
- Shavings collection tray for easy waste disposal and a cleaner work environment
- Large cast aluminum base for stability
- Externally accessible brushes for easy maintenance
- Maximum cutting depth of 4-1/2" with carbide tipped blade

What's in the Box

- Carbide tipped blade (A-90532)
- Socket wrench (782210-8)
- Switch button (411478-6)

SPECIFICATIONS

- Blade diameter: 12"
- Arbor: 1"
- Max. cutting capacities: 90° 4-1/2"; 45° 3-1/2"
- No load speed: 1,300 rpm
- Amps: (115V) 15.0
- Overall length: 20-1/4"
- Net weight: 41.9 lbs.

For fast cutting in light pipe, angle iron, tubing, conduit, and channels. D-shape handle for easy gripping. Long lasting carbide tipped blade for cost efficient and clean cutting. Virtually burr free. Lock-off button to prevent accidental starting. Guide plate adjusts 0 -45 for bevel cutting. Quick release vise for secure stock retention and fast repeated cut-offs. Socket wrench stores on base for convenience. Shaft lock for easy wheel changes.

STANDARD EQUIPMENT: Carbide Tipped Blade (A-90532), Socket W rench (782210-8), and Switch Button (411478-6). SPECIFICATIONS: Blade Diameter 12". Arbor 1". Max. Cutting Capacities: 90 degrees 4-1/2". 45 degrees 3-1/2". No Load Speed 1,300 RPM. AMPS (115V) 15.0. Overall Length 20-1/4".

Metal Cutting Circular Saw Blade

2010-12-18T01:10:00.000-08:00

There are many manufacturer of metal cutting circular saw blade in the market. A metal cutting circular saw is provided with an upper blade guard which includes a first sight window disposed in a first side surface and disposed in a plane angularly offset from a plane of the blade. The upper blade guard also includes a second sight window disposed in the second side surface of the upper blade guard.

A light window is disposed in a front portion of the perimeter outer surface of the upper blade guard. The upper blade guard is made from metal and the first and second sight windows and the light window are integrally formed as a one-piece member. The saw shoe and lower blade guard are configured to minimize chip spray from contacting a user.

We discuss here the few of them for you to choose.

1, Milwaukee 14 Inch Metal Cutting Circular Saw Blade 48-40-4505

- This 14 in. 72 tooth blade is designed to cut a variety of ferrous materials including pipe, angle iron, metal studs and conduit. The blade has vibration damping which reduces heat, sparks and noise for cleaner smoother, burr free cuts.

2, Lenox Metal Cutting Circular Saw Blades

They have many design and sizes from 7.25 in to 14 in. just visit your favorite store to buy.

3, Bosch CB748ST 7 1/4" 48T Zero Degree Hook Angle Metal Cutting Circular Saw Blade

- Bosch's Construction Series carbide blades have been designed to fit the needs of all framing and trim carpenters. Each blade has a thin-plate that has been hardened to stay flat and run true, cut after cut.

4, Panasonic EY9PM17A 6-1/2" x 40 Tooth Metal Cutting Circular Saw Blade - Diameter: 6-1/2" Teeth: 40

5, DeWALT DW934B 18V Metal Cutting Circular Saw Bare Tool

- DeWalt DW934B 18-Volt Heavy-Duty Cordless Metal-Cutting Saw

... and many other in the market. Visit your favorites store.

Metal Cutting Blade

2010-12-18T01:09:00.001-08:00

There are several types of metal cutting blade available in the market today. Select the best that fits your needs. Below are the finest of this kinds of products:

1, Black & Decker 74-593 Metal Cutting Blade for SC500 Navigator
- The Black & Decker 74-593 Navigator Metal Cutting Blade is designed to fit Navigator saw model #SC500.

2, Oshlun SBF-065048 6-1/2-Inch 48 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Mild Steel and Ferrous Metals

- This ferrous metal blades have been designed with a durable carbide grade and triple chip tooth grind which ensures an extended cutting life of all types of ferrous metals (mild steel) such as steel studs, angle iron, pipe, rebar, channel, flat stock and more. They can also be used for cutting non ferrous metals such as aluminum, copper and brass.

The specially formulated C-6 micro grain carbide with titanium lasts longer and leaves a burr free cut with little to no sparks or dust, which are common when using abrasives. They can cut 5 to 10 times faster and last up to 30 times longer than abrasives, allowing fewer blade changes and increased production. The higher tooth count blades are better suited for thinner materials, while the lower tooth count blades are better for thicker materials.

WARNING: Not recommended for cutting hardened materials. Never use on saws that run above the rated Max RPM. Proper clamping devices should be employed.

3, Freud D0748F Diablo Steel Demon 7-1/4 48 Tooth TCG Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor, Diamond Knockout, and PermaShield Coating

- Achieving premium results when working with ferrous metals is all about making precise cuts with clean, flat edging. The Freud D0748F makes this process easy, fast, and precise. This blade is expertly constructed with TCG (triple-chip grind) teeth protected by a special carbide blend, designed to deliver outstanding resistance to the powerful impacts of steel cutting.

Contractors, steel erectors, HVAC installers, and other steel fabricators will want to keep this blade on hand for all jobs that call for cutting ferrous metal components that measure 1/8-inch thick or thinner, such as steel studs, sheets, and piping.

(Note: this blade is for mild steel only.)

4, Milwaukee 48-40-4515 8-Inch 42 Tooth Ferrous and Non-Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor

- This Milwaukee 8-Inch 42T Cermet-Tipped Circular Saw Blade is designed to cut a variety of ferrous materials 3/32-inch and thicker, including pipe, angle iron, steel studs and conduit. The blade has vibration damping which reduces heat, sparks and noise for cleaner smoother, burr free cuts. Use it with the Milwaukee Dry Cut Saw 6370-20.

5, Malco MCCB7 7 1/4-Inch 56 Tooth Metal Cutting Saw Blade for Standing Seam Roof Panels

- This Malco Metal Cutiing Circular Balde, Specially Formulated, Tough C-6 Carbide Tipped Blade Fits All Popular Brands Of Portable Circular Saws, Lasts Up To 30 Times Longer Thatn Abrasive Disks For Cutting Unhardened Ferrous Metal, Make True, Flat Cuts In Standing Seam Metal Roofing & Metal Building Panels Without Burning Paint Or Protective Coatings, Also Makes Clean Cuts In Metal Studs, Light Angle Iron & Thin Walled Pipe.

...there are many brand name available in the market worldwide, so select the best for your needs.

Metal Band Saw Blades

2010-12-18T01:08:00.002-08:00

Wayco Sales, Inc. is one of the leading specialists in metal cutting equipment, supplies, and service within the western region of the United States.

Wayco has specialized in band saw blades and bandsaw machines for over 20 years. Although Wayco also offers many other metal cutting and wood cutting related products, its backbone still remains in providing High-Quality bandsaw blade and circular saw blades at affordable prices with delivery times that are Superior to its competition, as well as offering High-Quality Metal Cutting Equipment.

They sell and service metal cutting equipment, machines, bandsaw blades, circular sawblades, bandsaw parts, cutting fluids, and more.

Bi-Metal Band Saw Blades

After selecting your blade size and quantity you will have the choice to select between the brands they represent. Wayco sales inc. provided a brief description of each below.

1. SIMONDS IND'S. began it's operations in 1832 and is a leading global mfg. of quality industrial cutting tools. Simonds is a worldwide recognized brand name, which conveys, quality, service, and value in the cutting tools market. Made in USA.

2. The German manufacturer, 'ARNTZ' SAWING TECHNOLOGY has been in the business of making quality blades since 1793, but only introduced its 'band saw blades' into the US market in 2001. Arntz is a worldwide recognized name for it's quality saw blades.

3. The M.K. MORSE CO. was founded in 1962 with one focus, to make better saw blades and accessories. M.K. Morse's product lines include band saw blades, hole saws and accessories, hack saw blades, and the patented TheRealMcCoy hole saws with the built-in arbor.

The next time you want to buy metal band saw blades, visit Wayco sales inc.

Jig Saw Blades

2010-12-18T01:08:00.000-08:00

There are several brand or manufacturer of jig saw blades in the market. Here is the few of them.

1, LENOX F518S 5-1/4X3/8X18TPI Bosch Style Jigsaw Blade

- Shatter Resistant flexes without breaking & extends blade life. Ideal For Medium Metals from 1/16" to 1/4" when a longer blade is required.

2, Vermont American 5In 15Tpi Scroll/Jigsaw Blade 30408

- Precision sharpened to cut fine, intricate shapes. For sawing wood, plastic and non-ferrous metals.

3, Bosch T101BR100 4", 10TPI, HCS Bosch Shank Jigsaw Blade (100 pk)

- Laminated particleboard, chipboard, plywood, hard/soft wood & plastics 3/16" - 1-1/4" Blade Height : 0.28" Blade Thickness : 0.06" For Model Numbers : 1581 / 1582 / 1584 / 1580 / 1587 series, JS50, 7561 111, 7561 118, 1577, 1578, 1922K, and other jig saw models that accept T-shank blades Item Description : T-Shank Blades, Application Wood Material : HCS Overall Length : 4" Pack Quantity : 100

4, Bosch T5002 10-Piece Assorted T-Shank Jig Saw Blade Set

- This assortment of blades adds function and affordability to your jigsaw blade needs. Compatible with most competitor's jig saws. These blades eliminate the need to set the screw in a mounting hole to reduce breakage.

They are crafted to the durable Bosch standard The set includes two each of T101B, T119BO, T144D, T118A, and T118B jig saw blades.

5, Hitachi 725397 4-Inch 6 TPI Jig Saw Blades For Fiber Cement Siding - 3 Pack

- The Hitachi Jigsaw Blade is designed for fast, coarse cutting of abrasive materials. It is especially designed to saw through 1/4-inch to 3/4-inch fiberglass-reinforced plastic (FRP), 1/4-inch to 2-3/8-inch cement bonded particle board, and fiber cement (or hardiboard).

This jigsaw blade is 4 inches long and has 6 teeth per inch on the cutting side, the blade is carbide tipped for increased durability and cutting strength.

6, Black & Decker 74-592 Curved Cutting Jig Saw Blade for SC500 Navigator

- The Black & Decker 74-592 Navigator Curved Cutting Jig Blade is a specialty replacement blade designed for the SC500 Navigator.

7, Milwaukee 49-22-1178 T-Shank Metal/Wood Cutting Jig Saw Blade Assortment, 5-Pack

- Milwaukee Bi-Metal Jig Saw blades are designed and manufactured for the professional user. Bi-metal blades last longer than high speed steel or carbon blades. Detail to the material used, tooth shape and sharpness make these blades cut clean, fast and have a longer life.

These blades use a T-Shank and fit Milwaukee Jig Saws 6266-6, 6276-6, 6267-20, 6267-21 and other popular brands. Includes 5 individual blades.

8, Mibro 827751 General Purpose Jigsaw Blade Set, 10-Pieces

- This 10-Pack of General purpose Jigsaw Blades from MIBRO- a 60 plus year old company selected as one of Canada's " 50 Best Managed Companies" are designed for your toughest jobs. Cut through wood, metal and plastic with ease with these strong, precise blades.

The sets include 2- 3-Inch by 6 tpi wood cutting blades; 2- 3-Inch by 10 tpi wood cutting blades; 2- 3-Inch by 12 tpi Scroll wood cutting blades; 1- 4-Inch by 10 tpi smooth cut blade; 1- 2 3/4-Inchby 14 tpi metal cutting blades; 1- 2 3/4-Inch by 18 tpi metal cutting blades and 1- 2 3/4-Inch by 24 tpi fine metal cutting blade.

9, DEWALT DW3791 8-Piece T-Shank Jig Saw Blade Set

- Get all the all the blade types you need for your DEWALT or Bosch jig saws with the DEWALT DW3791 eight piece blade set. Crafted out of cobalt speed for extended life and stored in a durable vinyl pouch, these blades are designed to last.

The set comes with a variety of t-shank blades, including the 4-inch DW3755 8-TPI aluminum/fiberglass and DW3762 10-TPI laminate down cutting blades. Other 4-inch blades consist of the 6-TPI DW3750 and DW3753 as well as the 10-TPI DW3760.

Additionally, the 3-inch DW3776 24-TPI and DW3770 14-TPI blades along with the DW3765 12-TPI trim coping blade are enclosed.

...several other brands are available in the market worldwide. Visit your nearest store to buy for your needs.

Cold Saw Blades

2010-12-18T01:07:00.000-08:00

There are several brand name of cold saw blades in the market worldwide. One of this types of blade is the Demon 35066 14 Inch 66 Tooth Metal Cold Cut Saw Blade.

The Demon 35066 14 inch, 66 tooth metal cold cut saw blade, comes with 1 in arbor, new in package. Fresh off retail shelf. This is a carbide metal cutting blades will fit any 14 inch cold cut metal saw.

Another one is the M2 HSS Cold Saw Blades - This solid HSS cold saw blades are usually made from either M2 tool steel or M35 tool steel, alloyed with additional cobalt. Solid HSS cold saw blades are heat treated and hardened to 64/65 HRc. This high rockwell hardness gives the cutting edges of the teeth a high resistance to heat and wear. These blades are press quenched after hardening to prevent them from being warped. The term high speed steel (HSS) doesn't necessarily mean what it implies.

These blades are usually run at surface speeds lower than 350 SFM. Solid HSS cold saw blades may be used for cutting many different shapes and types of metal including: tubes, extrusions, structural sections, billets, bars, ingots, castings, forgings etc.

The third one is the Coated HSS Cold Saw Blades - M2 and M35-Cobalt(E) HSS saw blades are available in many different configurations. These blades are heat treated and press quenched to ensure flatness and low runout. The "E" designates a higher quality material, which is additionally alloyed with cobalt. Metal cutting circular saw blades in this grade of steel are used for materials which are difficult to machine such as stainless steel, titanium or other material grades with higher strength. This material is also perfectly suited to all applications in which longer blade life is needed.

Several brand are available in the market worldwide. Visit your favorite store to buy cold saw blades.

Best Circular Saw

2010-12-18T01:06:00.001-08:00

Find the Best Circular Saw for your Shop

A woodworker can choose to use a circular saw for the same reasons as carpenters and building contractors have been used for years: that are powerful, portable, to be set up to rip, crosscut and cut many non-wood materials. Here we will discuss the features to look for when choosing a circular saw.

Bigger is usually better:

Circular saws come in a few different sizes (based on the diameter of the saw blade) from 4" to the most common size, 7-1/4". They also tend to be rated by horsepower and / or RPM of the saw blade.

When choosing the best circular saw, a good rule is to buy one that has greater power than other models of the same size. While a 1-HP 7-1/4 "circular saw, it would probably be appropriate, I like the models that are at least two horsepower, because it is less likely to bind when under a load.

Saw Settings:

Circular saws have controls to adjust the depth of cut (from zero to about 2-3/8 "in a typical pattern of 7-1/4") and the bevel of the cut (the saw blade can be beveled zero to 45-degrees). Please check that the controls are easy to adjust and can be securely tightened to maintain the depth or angle. Some models use relatively large lever type controls where others used a little more than a wing nut.

Safety Features:

Circular saws all have some basic safety features. Make sure the saw you are considering has a safety switch, which must be held before the trigger can be depressed. It should also be a blade guard moves easily by pushing the saw through the wood, but arises in place when the saw is far from the stock.

As with all tools, circular saws can be very dangerous if not used correctly. Always read, understand and follow the safety instructions that come with the saw.

Additional features:

Better quality saws use additional features such as an anti-lock clutch, which are the flanges on both sides of the blade allowing the blade to slip if the blade binds on the stock, to protect the motor and mechanism of the unit. Another useful feature is the blade lock, which locks the drive shaft in place, making it easier to change the saw blade.

A. C. Power vs. Battery-saws engines:

A recent development in circular saw is powered by a battery of 4 inch blade models. These are great for small cutting, such as panels of plywood or 1/4-inch. They are lightweight and perfect when you need to achieve a high cut. However, they are lacking in horsepower, and are not very useful for cutting more than a 2x4s. I would definitely recommend having one of these battery packs in hand, but not until a number of other tools in your arsenal.

So get the best circular saw for your arsenal.

Table Saw Blades

2010-12-13T23:45:00.002-08:00

CHOOSING THE RIGHT TABLE SAW BLADES

There is an enormous selection of table saw blades out there, and picking the right ones for your particular needs can be confusing. But don’t worry, the choices aren’t as difficult as you might think, and you won’t have to cut back on groceries to get the blades you need.

THERE ARE FOUR BASIC BLADE TYPES, determined by the shape, or grind, of their teeth. They are fl at top grind (FTG), alternate top bevel (ATB), combination (ATBR), and triple-chip grind (TCG)

FTG blades have teeth whose top edges are square to the saw plate. Also called rakers, these teeth attack the wood much like a chisel chopping out the ends of a mortise. They’re fast cutting and durable, but don’t produce a clean surface. They’re designed to rip, sawing perpendicular to the grain.

The teeth on ATB blades are angled across the top edge, with every other tooth “leaning” in the opposite direction. The shape of the tooth causes it to shear the wood fibers cleanly using a slicing motion. The steeper the bevel angle, the cleaner the teeth cut, but the quicker they dull. Most 40-tooth ATB blades are marketed as “all-purpose” blades.

Combination blades consist of 50 teeth arranged in sets of five, with four ATB teeth followed by a raker tooth (thus the ATBR designation.) The ATB teeth are designed to crosscut cleanly while the raker teeth aid in ripping. Combination blades are also considered “all-purpose” blades. The teeth on a TCG blade alternate between a raker tooth and a chamfered tooth. The chamfered tooth roughs out the cut, while the following FTG tooth cleans it up.

How to Change a Table Saw Blade

Table saws are used on job sites and in garage workshops for cutting wood. Mount your table saw to a workbench or sturdy table before using, and never mount your table saw with the blade directly in line with yourself or another person. A table saw is every builder's dream tool, but safety precautions and proper rules must be followed. When setting up the table saw or during maintenence, always unplug the tool, especially when changing the saw blade.

Step 1 - Remove the two screws that hold the blade plate to the top of the saw table, and lift off the plate.

Step 2 - Insert a small allen wrench into the arbor hole on top of the saw table. Use the longer end of the allen wrench.

Step 3 - Rotate the saw blade manually until the allen wrench drops into place, preventing the blade from turning.

Step 4 - Place the smaller end of a larger allen wrench into the socket head cap screw on the side of the blade.

Step 5 - Turn the screw with the allen wrench counterclockwise until it is loosened. Take off the screw, the washer and then the table saw blade.

Step 6 - Install a new table saw blade. Replace the washer and then the screw. Using the allen wrench, tighten the screw.

Step 7 - Replace the blade plate and tighten the table top screws securely.

Tips & Warnings

Always keep the blade plate at least 1/32-inch from the blade. You can slide the blade plate away or toward the blade, depending on the thickness of the blade.

Never change a table saw blade without first unplugging the tool. Be careful when changing a table saw blade. The blades are very sharp.

Some common brand of table saw blades available in the market.

1, Oshlun SDS-0842 8-Inch 42-tooth Stack Dado Set with 5/8-Inch Arbor

- Our 16 piece stack dado sets are perfect for woodworker’s who want a premium cut at an affordable price. The high tooth count saws and chippers produce smooth bottom dado cuts ranging from 1/4-inch to 29/32-inch.

The precision ground C-4 micro grain tungsten carbide tips stay sharp longer and cut through all types of hardwood, softwood and plywood with the greatest of ease. Full body chippers make for an easier setup and less vibration when compared to other sets that feature wing style chippers. Each set also includes detailed setup instructions, a shim set for fine adjustments and a full color storage case.

2, Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor

- With this all purpose blade for table saws you can rip and crosscut 1" 2" rockhards and softwoods resulting in a smooth as sanded surface. With 20° face hook, ply veneers will crosscut with no bottom splinter at moderate feed rates. Double hard and 40% stronger C4 carbide will give up to 300% longer life between sharpenings. Ends blade changing (one blade does rip, combo and crosscut), second-step finishing and cutting 1/16" oversize to allow for resurfacing.

3, Hitachi 998862 8-1/2-Inch 60-Tooth ATB Carbide Saw Blade with 5/8-Inch Arbor

- Hitachi's premium 8-1/2-Inch miter saw blade offers the best cutting performance available. The carbide teeth are brazed with three metals allowing the tips to withstand extreme impact for maximum durability. The precision ground thin kerf allows for tight, clean, precise and fast cuts. The steel blade is laser cut keeping it flat and true for lasting performance making this 60-tooth saw blade ideal for producing ultra fine and smooth finishes in decorative moldings, veneer, laminates, soft and hard woods.

4, Skil 75140 10-Inch 40 Tooth ATB General Purpose Saw Blade with 5/8-Inch Arbor

- Founded in 1924 as the Michel Electric Handsaw Company and renamed Skilsaw, Inc. in 1926, SKIL has become one of the most recognized and powerful brands in the power tool industry. From circular saws and jigsaws to sanders and drills, SKIL power tools are engineered to deliver the high-performance and durability that today's growing population of Do-It-Yourselfers demand. Every product of the growing line of SKIL tools is the result of extensive end-user research, consumer input, computer assisted design and rigorous testing, both in our laboratories and in the field. SKIL Power Tools are products of the Robert Bosch Tool Corporation.

.... and many many more quality brand available today. Select the best fore your woodworking needs.

Reciprocating Saw Blade

2010-12-13T23:45:00.000-08:00

Makita is one of the leading manufacturer of power tools and accessories. They have several types of reciprocating saw blade available in the market. One of them is the Makita 723056-A-5 12-Inch 6-TPI Wood Cutting Reciprocating Saw Blade. For fast cutting, nail embedded wood, insulating board, plywood, and plastic pipe from 1/4" to 10" * Taper back * Made of BIM * 6 tooth per inch * .050" thickness * 3/4" width * 12" length * 5 per card.

A good one too is the Tri-Metalblades - reciprocating saw blade - Tri-Metal Blades, the NEW reciprocating saw blades that cuts in ALL directions, versatile, strong and twice the cutting surface than the standard blade. Tri-metal Blade easily does plunge cuts, butterfly cuts and multi-directional cuts without removing the blade from the saw. Tri-Metal Blades fit ALL reciprocating saws, cuts non-ferrous metals, plastic and nail embedded wood.

Another brand is the DEWALT DW4890 15-Piece Reciprocating Saw Blade Tough Case Set. Whether you're cutting through wood, metal, or old, crumbly drywall, there's a blade in the DeWalt DW4890 15-Piece Reciprocating Saw Blade Set that can help you work more efficiently.

Professionals know that job-specific tools make all the difference, and having different types of blade at your disposal can make one saw seem like three distinctive tools. The three distinct, durable types of blade in this kit are each six inches long, crafted with eight-percent cobalt, reinforced teeth, and flexibly bodies for serious durability, and they are designed to work with any brand of reciprocating saw.

You get five 6-TPI wood cutting blades, five 14-TPI thick metal cutting blades, five medium, 18-TPI medium metal cutting blades, and a rugged, plastic case that can be expanded to hold blades up to nine inches long.

Hitachi 725311 6-Inch, 6 TPI, Bi-Metal, Wood Cutting Nail Embedded Reciprocating Saw Blades is also a good one to choose. Very aggressive, coarse, fast cuts in green wood, fire wood, branches pruning 5/8" to 6". Hardened teeth for extended life.

M.K. Morse RB818T50 8-by-3/4-by-0.035-Inch 18 TPI Bi-metal Reciprocating Saw Blade, in 50 Pack. This MK Morse Bi-metal Reciprocating Saw Blades is also good one to choose. Over the years M.K Morse developed and refined a special manufacturing process designed to legthen blade life.

These are the blades good enough to be called Morse. These extra-tough, professional quality blades are available for a wide variety of uses in wood, metal, plastics, fiberglass, plaster and other common building materials.

They used electron beam weld the Matrix II cutting edge to the backer so that they can control the process and guarantee quality. Fits all popular reciprocating saw machines.

... and so many types and brand available in your nearest store.

Miter Saw Blade

2010-12-13T23:44:00.001-08:00

How to change a Craftsman Miter Saw Blade

Changing the blade on a miter saw is not as difficult as many think. However, it requires some knowledge of the tool and the focus on this task. It is important to ensure that you use the right size sheet.

Step 1 - Unplug the saw and lock the power cord. Locking the power cord will ensure that no one accidentally plug the saw while you're changing the blade.

Step 2 - Locate and activate the motor block. This button is located at the junction between the motor housing and the upper blade guard. Activate the lock by pressing the button and rotate the blade until it stops.

Step 3 - With a wrench, turn the blade bolt to the right (clockwise) to loosen. Remember turning the screw on the left to the left (counterclockwise) will tighten the screw.

Step 4 - Remove the blade screw and washer. Move the disc protector and remove the blade.

Step 5 - Place the new sheet in the correct location. Check that the rotation of the blade is right for the saw. The tips of the teeth should be facing downward.

Step 6 - Replace the blade washer and bolt. Using the wrench, turn the screw clockwise to tighten. Do not over tighten.

Step 7 - Unlock cable and test the saw.

Tips & Warnings

Remember that the carbide blades will last longer. Craftsman includes a wrench for this procedure with the saw.

Do not over-tighten the screws, it will tighten further during use and could break. Remember that the blade bolt is reverse-threaded, right (or clockwise) to loosen.

Metal Cutting Saw Blades

2010-12-13T23:43:00.003-08:00

Choose high-quality metal cutting saw blades and metal circular saw blades with a good cutting rate and long wheel life. Select from quality leading brands including Bosch circular saw blades, Jancy saw blades, National Diamond metal saw blades and more. Discover a wide assortment of diamond blades, surface grinders, stone polishing kits and more.

1, Bosch PRO1048ST 10 in. Steel cutting 50 Tooth Circular Saw Blade

- The new line of Bosch Professional Series circular saw blades are designed to meet the needs of professional users from woodworkers to firefighters. All blades feature industrial quality, laser cut, fully hardened bodies and oversized carbide tips.

2, Bosch PRO82540ST 8-1/4 in. Steel cutting 48 Tooth Circular Saw Blade

3, Evolution 10BLADEST 10 X 52T X 1 For Cutting Steel

- The ultimate in quality and durability, Evolution blades are designed for Evolution Steel cutting saws, but can also be fitted to other brands

4, Jancy MCBL07 Metal Cut Saw Blade for MCSL07 Saw 36 Teeth

- This blade is for cutting mild steel. The MCSL07 Saw does not come with a blade, must be purchased seperately.

5, Jancy MCBL07-ALM Aluminum cutting (solid plate or bar, 3/8 (9.5mm) maximum) for MCSL07 Saw 54 Teeth

6, Lenox 21878 6-3/4" x 20mm 40T Steel Metal Cutting Saw Blade

- RECOMMENDED APPLICATIONS: FERROUS STEEL, Structurals, Thick walled pipe, Threaded rod, Channel steel, Plate, Solid steel

• Blade Diameter: 6-3/4"Arbor Diameter: 20mmNumber of Teeth: 40RPM: 5800The Lenox AdvantageExtended lifeTitanium carbide tipped.Resists material build-up on teethClean cool cutsLess burr than abrasive bladesNo need for secondary grindingReduces material burningModified triple chip grind for added durability.

7. Milwaukee 48-40-4520 8 inch 50 Tooth Metal Saw Blade

- Endurance blades offer faster cutting and extra long life for contractors. Carbide teeth made of C-6 grade micro ground carbide with a modified triple chip grind provide an anti-kickback design while keeping the cutting edge sharper for longer periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. All these features add up to a high quality blade that contractors can depend on, time and time again.

8, Sawtrax 7-1/4 in. pab60 Aluminum Cutting 60 Tooth Blade

- Aluminum cutting blade, High Grade, 60 Tooth

Metal Cutting Circular Saw

2010-12-13T23:43:00.001-08:00

The advantages of a metal cutting Circular Saw

In the past, if we wanted to cut metal with a circular saw it was limited to abrasive wheels. The development of metal cutting circular saw blades of this situation has changed dramatically.

Metal cutting circular saw have been around for a while, but the saws are designed to use a recent development. A metal cutting circular saw is designed to operate at slower speeds, which they actually do the cutting blades more efficient.

Faster, but slower

Metal cutting circular saw blades cut faster than other metal cutting methods. Although metal cutting blade enters the slower material, finished cutting time is faster.

The slower speeds and sharp circular saw blades for metal cutting as well as leaving more fresh material after cutting. Cooler cutting materials result in a working environment faster and not have to wait for the metal to cool before handling.

Reducing the cost in half

Metal cutting circular saw drastically reduce the cost per cut. A typical grinding wheel averages about 60 cuts before it needs to be replaced. A metal cutting circular saw blade can cut many more than 2,000 cuts before it wears out. Even with a higher initial cost, a metal cutting blade cuts the cost by half.

Metal cutting Cleaner

A metal cutting circular saw blades leave a cleaner cut than an abrasive wheel. The design of a metal cutting blade result in a burr-free cutting. You will not stop after each cut to present in a cut piece.

Metal cutting circular saw are also constructed with metal clip collector to limit the amount of waste related to metal cutting. Although you can use a metal cutting blade with a conventional circular saw, the saw could be damaged by metal shavings into the motor housing.

Metal Cutting Band Saw Blades

2010-12-13T23:42:00.002-08:00

There are many manufacturer of metal cutting band saw blades out there. We discuss a few of them.

1, MORSE ZHEFH03 Band Saw Blade, 13Ft 1/2 In L, 3/4 W, TPI 3

- Carbon Steel Band Saw Blade, Flexible Back, Length 13 Ft 1/2 In, Width (In.) 3/4, Thickness (In.) 0.032, Teeth Per Inch 3, Tooth Type Hook, For Short Production And Maintenance Applications Cutting Wood And Low Alloy Steel and Non-Ferrous Metals.

2, MORSE 13' 0" -ZWEFC812MAT Band Saw Blade, 13 Ft., W 3/4, TPI 8-12

- Band Saw Blade, Welded To Length, Bi Metal High Speed Steel Edge Containing 8% Cobalt, Tooth Hardness Rockwell C 66-68, Length 13 Ft 0 In, Width 3/4, Thickness 0.035, Teeth Per Inch 8-12, Tooth Type Variable, For General Cutting On Light To Medium Duty Vertical/Horizontal Machines, Production Cutting For Steel, Iron, Aluminum, Contour Cutting For Irregular Shapes And Structures.

3, MORSE 13'2''-ZWEG083C610MAT Band Saw Blade, 13 Ft 2 In L, 1 W, TPI 6-10

- Band Saw Blade, Bi Metal High Speed Steel Edge Containing 8% Cobalt, Tooth Hardness Rockwell C 66-68, Length 13 Ft. 2 In, Width (In.) 1, Thickness (In.) 0.035, Teeth Per Inch 6-10, Tooth Type Variable, For General Cutting On Light To Medium Duty Vertical/Horizontal Machines, Production Cutting For Steel, Iron, Aluminum, Contour Cutting For Irregular Shapes And Structures.

4, Metal Cutting Band Saw Blade from Big Roc

Specifications:

Length: 64-1/2"
18 Teeth / Inch
High Cold Rolled Alloy Steel
Brightly Polished
Even Thickness Throughout

Metal Cutting Band Saw Blades - Olson Saw Company

- The Olson Saw Company manufactures a wide range of band saw blades, scroll saw blades, power scroll saw accessories, band saw accessories and handheld saw frames and blades, including coping and mini hack saws.

44-7/8in. x 1/2in. wide blades for portable band saws such as Milwaukee, Makita, Black & Decker, Porter Cable or others.

64-1/2" long x 1/2" wide blades fit most 4"x 6" horizontal/vertical metal cutting band saws.

93" x 3/4" wide blades fit most 7" x 12" horizontal metal cutting band saws such as Delta, Jet and others.

Hard Edge Hard Back with Wavy Tooth Style / Tooth Hardness: 62-63Rc Back Hardness: 40-42 Rc

Hard Edge Hard Back permits greater tension, improved blade rigidity, straighter, more accurate cuts, and greater blade strength allowing higher feed pressure. Ideal for easy-to-machine metal and similar materials at slow speeds and interrupted cuts such as pipe, tube, channel stock, etc. These 1/2" wide blades offer economy & value for mild contour cuts on vertical machines and cutoff operations on common horizontal band saws.

Bi-Metal Matrix with Variable Pitch Teeth blades have a high speed matrix cutting edge, electron beam welded to a low alloy shock resistant back and resist heat in excess of 1000 degrees F. They cut faster, last 10 times longer than carbon flex back or hard back, and have excellent shock and abrasion resistance.

Use Bi-Metal Matrix blades for horizontal gravity fed metal cutting band saws to cut a wide range of hard materials in production cut-off operations using heavy duty horizontal band saws.

Narrow widths are for vertical band saws to cut radii in hard-to-machine die steels, for contour cutting, re-sawing exotic woods, and for solids and for interrupted cutting.

Makita Saw Blades

2010-12-13T23:42:00.000-08:00

Makita is one of the leading manufacturer of the best power tools in the world. Makita Power Tools have more power and less weight, and are more compact and more efficient than any other. At jobsites around the world, professional users are dumping the old, getting the new and gearing-up with Makita. Makita offers more solutions for the professional trade. One of thier best quality product is the makita saw blades.

There several design of makita saw blades. We discuss the few them below:

1, Makita Recipro Saw Blade No.78 for Wood, 4390D Model 792541-7 - Ideal for wood cutting.

2, Makita A-94518 5-3/8Inch 30 Teeth Carbide-Tipped General Purpose Circular Saw Blade

- The Makita A-94518 is a 5-3/8 30 Teeth Carbide-Tipped General Purpose Circular Saw Blade. The blade is used with BCS550 18-Volt 5-3/8 Metal Cutting Saw. The blade is specially designed for cordless saws to permit more cuts per charge. It is individually hand-hammered for guaranteed flatness and tension and designed for specific applications from fiber-cement siding to sheet metal.

3, Makita A-85092 6-1/2 inch Carbide Blade 24T

- Ultra thin-kerf design for lighter cutting load that also saves material. Specially designed for cordless saws to permit more cuts per charge.

Individually hand-hammered for guaranteed flatness and tension. Designed for specific applications from fiber-cement siding to sheet metal.

4, Circular Saw Blade, 5 1/2"

- Combination for fast and smooth rips, crosscuts and miters. Ultra thin kerf design for lighter cutting load and to eliminate wasted material. Industrial brazing process done by hand, use of high grade carbide and finishing honing of tip to ensure qualityand a strong bond.

Individually hand-hammered by skilled Saw Technicians for flatness and proper tension. Fits Makita No.5005BA circular saw and other like saws. Alternate top bevel, precision ground teeth permit a clean cutting surface and long blade life.

This Circular Saw Blade is one of many top quality items in our Cordless Circular Saw Blades department.

5, Makita 721107-6A 4-3/8"" C.T. Saw Blade

- Designed for Makita Model No. 4200N (Ace No. 20314) Carbide tipped 20mm arbor24 tooth

6, Makita A-93675 10" x 60T Miter Saw Blade

- Features:
• Type -- Smooth Crosscutting
• Diameter -- 10"
• Number of teeth -- 60

7, Makita A-93681 10" x 80T Miter Saw Blade

- Features:
• Type -- Fine Crosscutting
• Diameter -- 10"
• Nymber of teeth -- 80

There are many many more design of makita saw blades available in the market. Just visit your favorite store online of offline.

Circular saw cutting guide

2010-12-13T23:41:00.001-08:00

This circular saw cutting guide is so easy to make and so easy and simple to use, you will be kicking yourself for not thinking about doing this soon!

Step 1 - Get a 12-inch wide (or as needed) piece of plywood (1 / 4 "to 1 / 2") which is the desired length of the type of cuts you will make. If you are ripping 8-foot plywood, then make the guide of 8 feet long. You may desired to make of several guides of different lengths.

Step 2 - Get another 2-inch wide board or strips of wood that is thin enough so that when your circular saw rests up against it the body of the saw will clear over it. This board will be the guide. Set the band on the plywood so that the blade is about 1 inch from the edge when the saw is supported against the guide plate.

Step 3 - Rip down your wood with the saw resting against the guide board.

To use the guide, simply draw a line on the board being cut. Clamp the guide on the edge of the guide aligned with the drawn line. By default, the cut will coincide with the line from the saw cut will always be flush with the edge. Be sure to use the same type of replacement sheet as different blades have slightly different cuts. There is no place for the measurement of the guide, only to draw the line and clamp!

10 saw blades

2010-12-13T23:40:00.001-08:00

There are many types of 10"saw blades around. You have to choose carefully of what you really needs. You can see an example of the various types of 10 saw blades below.

Crosscut Table Saw Blades

10" Diablo Fine Finish Saw Blade

This 10" saw blades has 60 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor. The ideal choice for trim carpenters, Diablo fine finish saw blades leave a smooth surface that requires little to no sanding. Ideal for crosscutting oak, pine, melamine, plywood and moulding.

10" Diablo Ultra Finish Saw Blade - COST: $49.97

- 80 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor. This Diablo ultra finish saw blade offers the quality that fine cabinetmakers expect from Freud, yet this blade is designed for the rough world of professional construction. This blade leaves a smooth, velvety finish that requires little to no sanding. Ideal for cross-cutting oak, pine, melamine, veneer plywood and delicate moulding.

10" Cabinetmaker's Crosscut Saw Blade - COST: $64.99

- 60 ATB tooth, 10° hook, 0.126" kerf, 5/8" arbor. Heavy-duty crosscutting blade designed for the industrial cabinetmaker. Provides a good crosscut and long cutting life in hardwood, softwood, plywood and chipboard. Ideal for cutting 1/2" to 2-3/4" thicknesses most commonly used by cabinemakers.

Ripping Table Saw Blades

10" Diablo Ripping Saw Blade - COST: $27.97

- 24 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor. The top choice for contractors who want a smooth finish when ripping. Ideal for ripping oak, pine, pressure treated lumber and plywood.

10" Heavy Duty Rip Saw Blade - COST: $49.99

- 24 flat tooth, 20° hook, 0.126" kerf, 5/8" arbor. For heavy duty smooth, fast ripping in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a glue line precision cut from 3/4" to 2-3/4" thick.

10" Fast Feed Rip Customized Woodworker II Saw Blade - COST: $69.00

- 20 tooth, carbide-tipped, 1/8" kerf, 5/8" arbor. Fast feed rip for thick hardwood without burning. Ideal for joinery and special uses.

General Purpose Table Saw Blades

10" Diablo General Purpose Saw Blade - COST: $29.97

- 40 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor. The best choice for your miter saw, this blade leaves a smooth cut in a variety of applications. Ideal for cutting oak, pine, plywood, pressure treated lumber and beams.

10" General Purpose Thick Stock Saw Blade - COST: $52.99

- 40 ATB tooth, 13° hook, 0.126" kerf, 5/8" arbor. The best choice for heavy-duty production sizing of hard or soft wood. Ideal ripping is from 3/8" to 1" thick and crosscutting from 1-3/8" to 3-1/2" thick.

10" All-Purpose Woodworker II Saw Blade - COST: $95.00

- 40 tooth, carbide-tipped, 15° ATB, 20° hook, 1/8" kerf, 5/8" arbor. Rips, crosscuts and miters on all hard and soft woods. Slices oak or birch veneer without splintering at moderate feed. Planer side clearances yield smooth as sanded cuts. Side wobble is held to 0.001".

Combination Table Saw Blades

10" Diablo Combination Saw Blade - COST: $36.99

- 50 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor. The best choice for a table saw when one blade is needed for ripping and crosscutting.

10" Premium Combination Blade - COST: $69.00

- 60 tooth, carbide-tipped, 3/32" kerf, 5/8" arbor. Primarily designed for cutting cross grain in soft and medium hardwoods and plywoods. Not recommended where more than 10% of the work is ripping. Teeth are top beveled and face beveled. As the top of the tooth cuts the fiber, the face is planing for smoothness with little, if any tear, chipping or feathering.

10" Trim & Cross-Cut All Purpose Woodworker I Saw Blade - COST: $105.00

- 60 tooth, carbide-tipped, 30° ATB, 5° hook, 3/32" kerf, 5/8" arbor. Scratch-free, polished crosscut and rip cuts on wood. Special side clearances produce super smooth cuts with or across the grain. Good for trim work, plywood veneers, and melamine. Self-feeding tendency is reduced by thin kerf and 5° face hook.

Laminate Table Saw Blades

10" Coated Precision Crosscut / Laminate Saw Blade - COST: $89.99

- 80 HiATB tooth, 2° hook, 0.126" kerf, 5/8" arbor. Use for crisp, splinter-free and chip-free cuts in hard and soft woods. Flawless finish in veneered plywood, melamines & laminates. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

10" Coated Single Sided Laminate / Wood Saw Blade - COST: $94.99

- 80 TCG tooth, 5° hook, 0.126" kerf, 5/8" arbor. Long life, production blades for single-sided laminates, chip board and other manmade materials. Thses are the blades of choice for countertop fabricators and laminate flooring installers. Triple Chip Grind (TCG) tooth design will give excellent cuts in hard and soft wood and wood products. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

10" Duraline HI A/T Saw Blade - COST: $125.00

- 80 tooth, carbide-tipped, 40° high angle ATB, 5° hook, 1/8" kerf, 5/8" arbor. A great blade for cutting birch and oak ply veneers and low pressure lamnates such as melamine and vinyl over particle board. No need for a scoring set up as this blade cuts clean with no splintering or chip-out on top and bottom surfaces. Also recommended for fine cross-cutting on all woods.

10" Plastic Saw Blade - COST: $79.99

- 80 MTCG tooth, -3° hook, 0.110" kerf, 5/8" arbor. For cutting plexiglass and plastics. This industrial blades cuts acrylics, polycarbonates and other plastics, leaving a smooth finish without melting.

10" Coated Solid Surface Blade - COST: $86.00

- 72 MTCG tooth, 0° hook, 0.126" kerf, 5/8" arbor. Specially designed triple chip grind (TCG) tooth design with a special side grind for leaving swirl-free cuts in solid surface materials such as DuPont Corian®, Wilsonart Gibraltar®, and SSV Fountainhead®. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

10" HardiPlank / Fiber Cement Saw Blade - COST: $79.00

- 6 tooth, diamond-tipped, 5/8" arbor. Fiber cement siding and board ripping and crosscutting. Designed for use with James Hardie siding products (Hardi Plank & Hardi Board).

.... select the best for your needs.

Reciprocating Saw Blades

2010-12-13T23:07:00.001-08:00

There are differrent Types of reciprocating saw blades

- Bi-metal blades – used for metal, wood, rubber, composites or plastic, represent the most common   choice.

- High speed steel blades – offer the user the possibility of cutting through almost any type of metal   at a high speeds.

- Carbon steel blades – especially designed for cutting through wood, plastic or fiberboard.

- Tungsten Carbide Tipped blades – offer fast cutting through wood, plastic, fiberboard, fiberglass,   drywall and other abrasive materials.

- Tungsten Carbide Grit Edge – used only for extremely abrasive materials or hard ones like steel,   glass, brick, ceramics or tile.

- Bi-metal air saw blades – are used only with pneumatic saws for cutting thin metal.

... and from different Manufacturer or Brand Name

Here is the few of them:

1, DEWALT DW4890 15-Piece Reciprocating Saw Blade Tough Case Set

- Whether you're cutting through wood, metal, or old, crumbly drywall, there's a blade in the DeWalt DW4890 15-Piece Reciprocating Saw Blade Set that can help you work more efficiently. Professionals know that job-specific tools make all the difference, and having different types of blade at your disposal can make one saw seem like three distinctive tools.

The three distinct, durable types of blade in this kit are each six inches long, crafted with eight-percent cobalt, reinforced teeth, and flexibly bodies for serious durability, and they are designed to work with any brand of reciprocating saw. You get five 6-TPI wood cutting blades, five 14-TPI thick metal cutting blades, five medium, 18-TPI medium metal cutting blades, and a rugged, plastic case that can be expanded to hold blades up to nine inches long.

2, Skil 94100-05 Pruning Reciprocating Saw Blades, 5-Pack

- The Skil 94100-05 Pruning Reciprocating Saw Blades are designed for extremely fast cutting in wood, pressure treated lumber, wet wood and composition board. These blades feature a fleam ground design that let you cut on both forward and reverse strokes. With 4-5 TPI and 9 inches in length, and made of strong and durable high carbon shell with fire-hardened cutting edges, the Skil 94100-05 blades can also be used for pruning. Five blades are included in the pack. These blades fiat all Skil and most other major brand reciprocating saws.

3, Bosch RP125 12-Inch 5 TPI Wood Cutting reciprocating Saw Blades - 5 Pack

- Bosch RP125 12-Inch 5 TPI Wood Cutting reciprocating Saw Blades (5 Pack) are from a new line of recip blades. By incorporating key design features, materials and patented tooth technologies, Bosch optimizes blade cutting efficiency for the fastest cutting and longest lasting blades available.

Choose from blades suited for occasional, standard, heavy or demolition use in a variety of materials such as wood with nails, metal, stainless steel, cinder block, cement board or fiberglass. Flexible blades, thick kerf and tall body blades and carbide blades for abrasive materials are available and blade selection is made even easier with application color-coding and callouts on the blades.

Bosch is the worldwide leading manufacturer of linear edge, topping the market through engineering expertise, manufacturing capabilities and world reknowned quality.

4, Makita 792541-7 Reciprocating Blade

- For use with Model No. 4390D and 4390DW cordless reciprocating saw. 5 blades per card. No. 792540 9: 24TPI, for mild steel, plywood, masonite, plastics and formica; overall length: 3 15 16" No. 792615 4: 24TPI, for mild steel, plywood, masonite, plastics.

5, Hitachi 725324 6-Inch, 18 TPI, Bi-Metal, Metal Cutting Reciprocating Saw Blades - 5 Pack

- Straight back, Bi-Metal reciprocating saw blade. Used for cutting metal and non-ferrous metal, sheet metal, and pipe from 1/8-inch to 3/16-inch.

Product Description

- Straight, fast cuts; Break resistant and flex in profiles and pipes to 1/2"; Thin metal, sheet metal, non-ferrous metal and aluminum 1/16" to 1/8".

6, Milwaukee 48-00-5026 The Ax 9-Inch 5/8 TPI Reciprocating Saw Blades, 5-Pack

- The Milwaukee 48-00-5026 The Ax 9-Inch Reciprocating Saw Blades are designed for the toughest cutting applications in wood and nail-embedded wood. These blades have a sloped shape for superior plunge cutting for demolition and remodeling work.

The blades are 1 inch tall for straight, fast cutting, and an extra-thick, 0.062 inches, to prevent bending. A unique heat treating process extends the life of the blades, and bi-metal construction prevents them from shattering.

These 9-inch long blades are ideal for cutting into walls that contain wood, nails, plaster and aluminum, and they feature a 1/2-inch universal tang that fit all Sawzalls. This pack includes 5 blades and comes with a 5-year limited warranty.

7, M.K. Morse RB618T50 6-by-3/4-by-0.035-Inch 18 TPI Bi-metal Reciprocating Saw Blade, 50-Pack

- MK Morse Bi-metal Reciprocating Saw Blades. Over the years they have developed and refined a special manufacturing process designed to legthen blade life. These are the blades good enough to be called Morse.

These extra-tough, professional quality blades are available for a wide variety of uses in wood, metal, plastics, fiberglass, plaster and other common building materials. We electron beam weld the Matrix II cutting edge to the backer so that they can control the process and guarantee quality. Fits all popular reciprocating saw machines.

...several types and brand are available in the market worldwide. Visit your nearest store to buy one for your needs.