Cold Saw Blades

There are several brand name of cold saw blades in the market worldwide. One of this types of blade is the Demon 35066 14 Inch 66 Tooth Metal Cold Cut Saw Blade.

The Demon 35066 14 inch, 66 tooth metal cold cut saw blade, comes with 1 in arbor, new in package. Fresh off retail shelf. This is a carbide metal cutting blades will fit any 14 inch cold cut metal saw.

Another one is the M2 HSS Cold Saw Blades - This solid HSS cold saw blades are usually made from either M2 tool steel or M35 tool steel, alloyed with additional cobalt. Solid HSS cold saw blades are heat treated and hardened to 64/65 HRc. This high rockwell hardness gives the cutting edges of the teeth a high resistance to heat and wear. These blades are press quenched after hardening to prevent them from being warped. The term high speed steel (HSS) doesn't necessarily mean what it implies.

These blades are usually run at surface speeds lower than 350 SFM. Solid HSS cold saw blades may be used for cutting many different shapes and types of metal including: tubes, extrusions, structural sections, billets, bars, ingots, castings, forgings etc.

The third one is the Coated HSS Cold Saw Blades - M2 and M35-Cobalt(E) HSS saw blades are available in many different configurations. These blades are heat treated and press quenched to ensure flatness and low runout. The "E" designates a higher quality material, which is additionally alloyed with cobalt. Metal cutting circular saw blades in this grade of steel are used for materials which are difficult to machine such as stainless steel, titanium or other material grades with higher strength. This material is also perfectly suited to all applications in which longer blade life is needed.

Several brand are available in the market worldwide. Visit your favorite store to buy cold saw blades.