Metal Cutting Blade

There are several types of metal cutting blade available in the market today. Select the best that fits your needs. Below are the finest of this kinds of products:

1, Black & Decker 74-593 Metal Cutting Blade for SC500 Navigator
- The Black & Decker 74-593 Navigator Metal Cutting Blade is designed to fit Navigator saw model #SC500.

2, Oshlun SBF-065048 6-1/2-Inch 48 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Mild Steel and Ferrous Metals

- This ferrous metal blades have been designed with a durable carbide grade and triple chip tooth grind which ensures an extended cutting life of all types of ferrous metals (mild steel) such as steel studs, angle iron, pipe, rebar, channel, flat stock and more. They can also be used for cutting non ferrous metals such as aluminum, copper and brass.

The specially formulated C-6 micro grain carbide with titanium lasts longer and leaves a burr free cut with little to no sparks or dust, which are common when using abrasives. They can cut 5 to 10 times faster and last up to 30 times longer than abrasives, allowing fewer blade changes and increased production. The higher tooth count blades are better suited for thinner materials, while the lower tooth count blades are better for thicker materials.

WARNING: Not recommended for cutting hardened materials. Never use on saws that run above the rated Max RPM. Proper clamping devices should be employed.

3, Freud D0748F Diablo Steel Demon 7-1/4 48 Tooth TCG Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor, Diamond Knockout, and PermaShield Coating

- Achieving premium results when working with ferrous metals is all about making precise cuts with clean, flat edging. The Freud D0748F makes this process easy, fast, and precise. This blade is expertly constructed with TCG (triple-chip grind) teeth protected by a special carbide blend, designed to deliver outstanding resistance to the powerful impacts of steel cutting.

Contractors, steel erectors, HVAC installers, and other steel fabricators will want to keep this blade on hand for all jobs that call for cutting ferrous metal components that measure 1/8-inch thick or thinner, such as steel studs, sheets, and piping.

(Note: this blade is for mild steel only.)

4, Milwaukee 48-40-4515 8-Inch 42 Tooth Ferrous and Non-Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor

- This Milwaukee 8-Inch 42T Cermet-Tipped Circular Saw Blade is designed to cut a variety of ferrous materials 3/32-inch and thicker, including pipe, angle iron, steel studs and conduit. The blade has vibration damping which reduces heat, sparks and noise for cleaner smoother, burr free cuts. Use it with the Milwaukee Dry Cut Saw 6370-20.

5, Malco MCCB7 7 1/4-Inch 56 Tooth Metal Cutting Saw Blade for Standing Seam Roof Panels

- This Malco Metal Cutiing Circular Balde, Specially Formulated, Tough C-6 Carbide Tipped Blade Fits All Popular Brands Of Portable Circular Saws, Lasts Up To 30 Times Longer Thatn Abrasive Disks For Cutting Unhardened Ferrous Metal, Make True, Flat Cuts In Standing Seam Metal Roofing & Metal Building Panels Without Burning Paint Or Protective Coatings, Also Makes Clean Cuts In Metal Studs, Light Angle Iron & Thin Walled Pipe.

...there are many brand name available in the market worldwide, so select the best for your needs.