Miter Saw Blades

There are many types of miter saw blades in the market.

Here is the few of them:

1, Kempston 99362 10-Inch by 60 Tooth Industrial Thick Kerf Sliding Compound Miter Blade with 5/8-Inch Arbor and Teflon Coating

2, Freud LU91R010 10" Diameter x 60T ATB Thin Kerf Sliding Compound Miter Carbide-Tipped Saw Blade with 5/8" Arbor (.090 Kerf)

- This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws.5 degree negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence.kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.

Application: Fine Finish Blades for Sliding Miter & Radial Arm Saws.

3, Miter saw blades manufactured by Amana Tool. These saw blades are of the highest industrial quality with extra large micrograin carbide teeth (can be sharpened many times), large gullets for improved chip clearance, thick heavy duty steel plates with copper plugs to reduce noise and vibration.

Here is the miter saw blade from Amana Tools:

1, Miter Saw Blades - 2° Negative Hook - 4 ATB & 1 Raker - For miter joint cutting in softwood and hardwood, moldings and picture frames.

These saw blades can be used on double miter machines.

2, Miter Saw Blades - 5° Negative Hook-California TC Grind - California Triple Chip design of tooth is the perfect choice for the picture frame industry. Burr-free cuts in aluminum and other non ferrous metals. Cuts clean wood and wood products. Works in miter saw, compound miter saw and sliding compound saw. –5° hook. These saw blades can be used in double miter machines.

3, Thin Kerf Miter Saw Blades - ATB Grind - Thin kerf blades are designed for miter smooth cuts; less drag on bearings and brake and reduces stock loss on expensive woods and veneer plywoods. Not recommended to cut stock over 3/4" without the use of a stabilizer.

4, Thin Kerf Sliding Compound Miter & Radial Saw Blades - A.G.E. Series - Specially designed for sliding compound miter saws, these thin kerf saw blades provides an exceptional finish.  The 3°-5° negative hook angle provides an extra margin of safety by pushing the stock downward and toward the fence. Thin kerf blades reduce waste in expensive materials and require less horsepower to operate.

...and many more quality products from Amana Tools. Visit your favorite store online or offline.